HomeAbout UsProjectsProductsInformationHospitalityContact Us
Hand A DoorHardware FinishLock TypesLock Functions

HomeAbout UsProjectsProductsInformationHospitalityContact Us
Hand A DoorHardware FinishLock TypesLock Functions

(301) 898-2828
HM DOOR DESIGN FEATURES
HM FRAME INFORMATION
ARCHITECTURAL BEVELED EDGE:
• Ensures easy operation with      
  frame
• Eliminates binding and sticking
• Allows tighter fit for neat 
  appearance
• Makes field installation             
  easier
VERTICAL SEAM:
• Continuous mechanical interlock for
  maximum rigidity
• Epoxy applied to inside of seam for
  additional strength and moisture barrier
• Hinge and lock edge seams are     
  symmetrical
HEAVY GAGE END CHANNELS:
14 gage (1.7mm) top and bottom
reinforcing channels are standard in
Steelcraft doors. The 14 gage
(1.7mm) far exceeds the industry
standard of 18 gage (1mm). The
heavy channels are projection welded to both door panels. The door is stable and the door top and/or
bottom are protected from abuse.
UNIVERSAL HINGE REINFORCEMENT
AND PLACEMENT:
The edge of Steelcraft doors is mortised and
reinforced to accept the hinge leaf. The
beveled edge and seam position the hinge so 
that filler plates are not required.  The 
reinforcement is 7 gage (4.3mm) and is one of 
the strongest in the industry. It exceeds the 
industry standard of 10 gage (3.4mm) and is 
28% thicker than the actual hinge. The 
preparation is designed to accept a standard 
weight or heavy weight hinge with a simple
 modification. The reinforcement is projection 
welded to the edge of the door.
RECESSED GLASS TRIM:
Steelcraft’s DEZIGNER TRIM® is a steel recess mounted (flush design) type with mitered, reinforced corners and concealed fasteners. The recess mounted trim allows exit devices to be mounted without interference with the glass trim. It is designed to be used on label and non-label doors and will accept 1/4"(6 mm) or 1/2"(13 mm) thick glass
HIGH FREQUENCY HINGE PREPARATION:
Additional strength can be added to the normal reinforcement when an opening is classified as high frequency. The added reinforcements are welded to the reinforcement and door panel
distributing the torque and pressure 
evenly.
DEZIGNER TRIM:
DEZIGNER TRIM has reinforced
mitered corners, for a clean, neat and flush finish with the door face. That means less bulk, more strength and a sleeker look. Assembled by hand in our factory to spec, DEZIGNER TRIM has universal interior and exterior applications. Not only can you choose your own color palate, it’s now available in our GRAIN-TECH stainable wood grain finish as well.
FAS-SEAL™ DOOR BOTTOM:
The Fas-Seal concealed double sweep
conforms to sill variances, provides
effective seal, is fire rated and meets the
requirements of NFPA 105 where smoke
control door openings are required.